We do have the Replacement Caliper for Dexter 10" Brakes # K71-773-01 which is a direct replacement for your Dexter K71-773-01 calipers you have currently if you're just looking for those.
If not, the Kodiak Disc Brake Caliper # KDBC225DAC will also work since Kodiak is owned by Dexter and these calipers are also for 10" brakes, rated for 3.5K to 6K axles. view full answer...
The stereo systems used in RV's aren't listed anywhere for us to know what you currently have so I would really need to have you remove the unit from the wall/dash/cabinet it's in and measure the cutout hole to determine a good replacement. For example, the Jensen RV Stereo w DVD Player # JWM70A you were looking at requires a 7-1/2" wide x 2-3/4" tall x 6-1/4" deep cutout hole. view full answer...
If the sidewall of your 4.80-12 size tires say 90 psi then that is what you want them to be when the tires are cold (after they have been sitting for a while like overnight). This is the psi rating that the manufacturer has tested and approved to be safe with the weight rating that is listed on the tire. The psi will actually increase some during travel due to heat build up but the manufacturer has already accounted for this.
The 90 psi rating is actually normal for that size tire. For... view full answer...
The Dutton-Lainson Drill Drive Socket Adapter for DLB Series Winches Item # DL6456 can be used in place of your crank handle on your Coachman Clipper 806XLS Pop Up camper. The socket adapter measures
7/8" x 7/8" x 3/4" and fits 1/2" drills. view full answer...
Self adjusting brake assemblies do not affect anything aside from the way the brakes adjust. There would be no affect on what sounds like your EZ Lube spindle setup. view full answer...
That picture of your wheel is pretty crazy! I hope the damage was minimal and no one got hurt!
If you damaged a bearing there's a pretty good chance you also damaged the spindle it rides on. You'd need to inspect the spindle to make sure it's free of damage. If it's damaged it's probably a good idea to just replace the axle since you are already at the point of replacing most of the axle. Especially if the hubs are currently pretty rusty on both sides most likely.
You are going to need... view full answer...
Before we can find you the replacement spring that would work for you, you will have to take off a current spring off your 2014 Coachmen Clipper 17BH and measure from the center of the spring eye to the center of eye spring along the curve. We would also need to know the weight capacity of your axle.
The 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles # SP-051275 measures out to be 26 inches from center of spring eye to center of spring eye. The spring is for a 4,000 pound axle.
I... view full answer...
We don't have any way of knowing what anode rod is needed for a water heater in any specific trailer. If you have a Suburban (Mor-Flo) heater use the Camco RV Water Heater Anode Rod # CAM11563; for an Atwood water heater use the Camco RV Water Heater Anode Rod # CAM11553. view full answer...
While we do not have the Bauer Products European Style RV Entry Door Lock # BA26AR in a keyless version like you're looking for, we do still have a keyless option for you.
-The Global Link Ultra E Pro Electronic Lock for Travel Trailer w Keyed Alike Option # 295-000185.
This door lock features a built in LED touchpad for keyless entry, can be easily installed with a screwdriver, and can be keyed alike to match other Global Link Locks.
I have included a review video for you to check out... view full answer...
Yes, the Camco UltraGuard Pop-Up Camper Cover # CAM45765 is going to be compatible with your trailer's rooftop AC unit. Manufacturers add in a bit of extra slack since every camper is going to have an AC unit or roof vent on it. view full answer...
That is exactly what it sounds like is going on. for your situation I recommend checking the wiring on the back of the switch to make sure it's clean and has solid connections. If it looks like it needs to be replaced then you just need the switch itself:
- Black Switch # LC285500
- White Switch # LC285499
Just be sure to follow the wiring instructions that come with the switch if you end up replacing it. view full answer...
Yes the roof style you have on your 2012 Coachmen Clipper is exactly what the SportRack roof rack part # SR1020 is designed to fit. I attached a picture that shows it installed on a roof just like yours. view full answer...
I looked up your Apex by Coachmen qb24 and it appears to have a double step setup below the door so for a 24 inch wide double step with 7-7/8 inches of drop between the steps our best option is the Flexco Manual Step part # SMFP-2100. It's hard finding steps with a shorter drop between stairs but this would be best option. view full answer...